HP Hewlett Packard Network Card BL10e User Manual

QuickSpecs  
Overview  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
ProLiant BL e-C lass Server Blade Enclosure  
(shown with 20 ProLiant BL10e server blades)  
ProLiant BL10e G eneration 2 (G 2) Server Blade  
 
DA - 11686 Worldwide — Version 13 — October 8, 2004  
Page 1  
QuickSpecs  
Overview  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
PLUS  
or  
or  
a. C-GbE Interconnect Switch  
b. RJ-45 Patch Panel  
c. RJ-21 Patch Panel  
Configuration Steps  
For a complete configuration of the HP ProLiant BL e-Class system, do the following:  
1. Select ProLiant BL10e G2 server blades sold [in a single-pack or 10-pack]  
PLUS  
2. Select Server Blade Enclosures (each can hold up to 20 ProLiant BL10e G2 server blades). The enclosure can be purchased bundled with 20 licenses  
for ProLiant Essentials Rapid Deployment Pack at 50% of the standard license price.  
(NOTE: Rapid Deployment Pack is optimized for configuring and deploying ProLiant BL10e G2 server blades and enable unique features such as  
blade "rip and replace" for effortless server redeployment.)  
PLUS  
3. Select one of the three Interconnect Tray options for each server blade enclosure  
(NOTE: Each interconnect tray includes an Integrated Administrator module.):  
a. C-GbE Interconnect Switch (with 4 10/100/1000T Gigabit Ethernet  
RJ-45 uplinks for up to 40-to-1 network cable reduction!)  
O R  
b. RJ-45 Patch Panel (with 40 RJ-45 connectors)  
O R  
c. RJ-21 Patch Panel (with 4 RJ-21 connectors for cable aggregation behind the enclosure)  
(NOTE: If suitable for your environment, select also the RJ-21 to RJ-45 Cable Option kit.)  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 3  
QuickSpecs  
Standard Features  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
HP ProLiant BL10e G2 Server Blade  
Processor  
One Ultra-Low Voltage Intel Pentium M 1GHz processor  
Cache Memory  
C hipset  
1MB Level-2 on-die Cache  
ServerWorks GC-SL chipset  
NOTE: For more information regarding ServerWorks, please see the following URL:  
Memory  
Standard  
512MB PC2100 Registered ECC DDR DIMM Memory standard (1x512 MB)  
1024 MB (2 DIMM slots total)  
Maximum  
Network Controller  
Internal Storage  
Two NC3163 Fast Ethernet NIC PCI 10/100 full WOL and PXE Integrated  
Hard Drive One 40-GB Ultra ATA/100 5,400 rpm Non-Hot Plug hard drive  
W arranty for the Server  
Blade  
1 year on parts, 9x5 NBD. HP Care Pack warranty upgrades available to add labor, on-site service, faster response times,  
and longer terms to the standard server blade warranty.  
Form Factor  
Server blades plug vertically into HP ProLiant BL e-Class Server Blade Enclosure  
Product Dem o  
To view the Product Demo, please see the following URL, then click on "PRODUCT DEMO":  
HP ProLiant BL10e G2 Server Blade Enclosure  
D im ensions  
5.25 inch Height (3U), 17.5 inch Width, 28.35 inch Depth  
Bays for up to 20 ProLiant BL10e G2 server blades  
Rack C apability  
Mounts in HP, HP-branded, third-party, and Telco racks. Rack mounting hardware for HP, Compaq-branded and third-  
party racks ships standard with each server blade enclosure. Telco rack-mounting hardware is a separately available option  
kit.  
Server Blade Enclosure  
includes  
Rear bay for 1 of 3 Interconnect Tray configurations for network cable management (see below).  
Two (2) Diagnostic Adapters for connecting keyboard, video, mouse and other devices locally to individual server blades  
ProLiant Essentials Foundation Pack for ProLiant BL Servers, includes the Insight Managerä 7 and Management Agents CD  
and ProLiant Essentials Rapid Deployment Pack CD (trial version - 7-days, 10 nodes).  
(NOTE: The ProLiant BL e-Class server blade enclosure can also be purchased bundled with 20 licenses for Rapid  
Deployment Pack at 50% of the standard license price.)  
Four (2+2 redundant) hot- plug fans  
Dual (1+1 redundant) hot- plug power supplies (600 watts each), power cords  
Server blade blanks (to fill 19 of the 20 server blade bays)  
Rack mounting hardware for HP, Compaq-branded and third-party racks  
Null-modem cable for serial connection to the Integrated Administrator serial "Console" connector  
HP Documentation CD  
W arranty for Server Blade 3 years on parts, labor and on-site service. HP Care Pack warranty upgrades available to add faster response times to the  
Enclosure standard warranty.  
HP ProLiant BL e-Class Interconnect Trays  
NOTE: Each interconnect tray includes the Integrated Administrator module.  
Please see the following (3) interconnect tray configurations for accessing server blade network connections:  
ProLiant BL e-Class C-GbE Interconnect Switch (with 4 Gigabit Ethernet uplinks for up to 40-to-1 network cable reduction!)  
NOTE: See details below.  
RJ-45 Patch Panel (with 40 RJ-45 connectors)  
RJ-21 Patch Panel (with 4 RJ-21 connectors for cable aggregation behind the enclosure)  
NOTE: See "Other Options" below for RJ-21 to RJ-45 Cable option kit.  
W arranty  
3 years on parts, labor and on-site service. HP Care Pack warranty upgrades available to add faster response times to the  
standard warranty.  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 4  
QuickSpecs  
Standard Features  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
HP ProLiant BL e-Class Integrated Administrator ver. 1.40 Features  
Out-of-band local console and remote network access to the server blade enclosure and all 20 server blades via  
(one) RJ-45 10/100T Fast Ethernet and (one) RS-232 management connectors  
Provides local and remote access to the ProLiant BL e-Class C-GbE Interconnect Switch command console and  
browser-based management interfaces  
SNMP, Web (via HTTPS) and command-line interfaces (via Console connector, Telnet and Secure Shell)  
Remotely power on/off/reboot server blades and enclosures  
Remotely toggle on/off unit identification LEDs (UID) of server blades and enclosures  
Monitors and controls the enclosure fans, temperature sensors, power supplies, interconnect switch and server blade  
status  
Connect to each server blade's serial text console for enabling full control over server blade's  
Power-On Self Test (POST) and boot process, including the ROM-Based Setup Utility (RBSU).  
NOTE: For ProLiant BL10e G2 server blades running Windows® 2000 Server, there is now available a Serial  
Console for Windows utility that provides serial-based administrative functionality using the Integrated  
Administrator remote console feature. For more information and to download the Serial Console for Windows  
utility, go to the following page:  
User administration for up to 25 users. Server blade bay privileges can be set on a per-user basis  
Virtual NMI button generates non-maskable interrupt for crash debug and analysis  
Support for Network Time Protocol (NTP)  
IP Security feature limits access to user-specified IP addresses  
AlertMail enables email alerts for system events  
More than 100 scriptable commands enable automated management  
Selective enabling of all protocols, such as Telnet  
Logging of operating system console, server blade and enclosure hardware events, user actions and invalid login  
attempts  
Emergency server blade enclosure shutdown caused by a critical temperature  
Enclosure Link (2) connectors reserved for future use.  
CAUTIO N: The enclosure link (RJ-45) connectors on the interconnect tray are not to be used. Connecting an  
external device to these enclosure link (RJ-45) connecters may damage your external device.  
For more information on the ProLiant BL e-Class Integrated Administrator, please visit the Web site at:  
HP ProLiant BL e-Class C-GbE Interconnect Switch Features  
Provides up to a 40-to-1 reduction in network cables for each server blade enclosure using a pair of non-blocking  
layer 2 switch modules  
Four RJ-45 10/100/1000T Gigabit Ethernet uplinks  
Forty 10/100T Ethernet ports dedicated to server blade-to-interconnect switch network communications  
Communicate with all 40 server blade network controllers through any one uplink connector and the management  
connector  
Spanning tree protocol for loop-free path redundancy  
Browser, scriptable CLI, and console-based interfaces for local and remote interconnect switch management  
Manage entire interconnect switch through the Integrated Administrator connectors or any uplink connector  
Telnet, RMON and SNMP support; SNMP-based scripting utility with example scripts  
256 Port-based IEEE 802.1Q tagged VLANs per switch processor module  
IGMP (internet group management protocol) snooping and quality of service (QoS) packet prioritization  
TFTP server support for rapid deployment of multiple interconnect switches and to provide backup and restore  
capabilities  
Industry-standard design compatible with industry-standard network components from leading network  
manufacturers  
Fully pre-configured for rapid deployment and immediate operation in ProLiant BL e-Class enclosure  
For more information on the ProLiant BL e-Class C-GbE Interconnect Switch, please visit the Web site at:  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 5  
QuickSpecs  
Standard Features  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
Other Options  
RJ-21 to RJ-45 Cable option kit; contains four (4) 10 foot RJ-21 to RJ-45 cables (for use with the RJ-21 Patch Panel)  
interconnect tray  
Diagnostic Adapter Interfaces  
NOTE: Two Diagnostic Adapters are included with every ProLiant BL10e G2 Server Blade Enclosure.  
ProLiant BL10e G2 server blade LEDs and buttons  
PS/2 Mouse  
PS/2 Keyboard  
Video  
Serial  
USB (2)  
NOTE: Please see the following URL for additional information regarding USB support:  
NOTE: This Web site is available in English only.  
NOTE: Server blades also support USB keyboard and USB mouse attached via the Diagnostic Adapter. The following USB  
devices have been tested for use with the ProLiant BL10e and the Diagnostic Adapter:  
USB Easy Access Keyboard (Carbon) (PN 267146-xx8)  
USB Easy Access Keyboard (Carbonite) (PN DC168B#)  
USB 2-Button Scroll Mouse (Carbon) (PN 195255-B25)  
USB 2-Button Scroll Mouse (Carbonite) (PN DC172B)  
USB Floppy (PN 304707-B21)  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 6  
QuickSpecs  
Standard Features  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
ProLiant Essentials  
Foundation Pack  
Software for the ProLiant  
ProLiant Essentials Rapid  
Deployment Pack  
Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution for  
all ProLiant servers. RDP includes the Altiris Deployment Solution and ProLiant Integration  
Module featuring ProLiant server pre-configured events for OS installation, and optimized  
software drivers, firmware and management agents. Every RDP CD includes 10-node trial  
licenses for evaluation purposes. RDP requires a license for each server deployed and are  
available for purchase with blade servers. For more information, visit  
BL Server  
HP Systems Insight Manger  
HP Systems Insight Manager (HP SIM) help maximize system uptime and performance and  
reduce system maintenance costs by providing proactive notification of problems before  
those problems result in unplanned downtime or reduced productivity. HP SIM is easy to set  
up to work with the Insight Management Agents, integrated Light-Out and Remote Insight  
Light-Out Edition, and Version Control Agents to deliver robust fault, configuration, and  
asset management as well as remote administration. With HP Systems Insight Manager  
customers will also be able to take advantage of role-based security; the ability to manage  
ProLiant, Integrity, and HP9000 systems; and plug-ins for storage, client, printer, and  
power management as well as server rapid deployment, performance management, and  
workload management. For more details on HP Systems Insight Manager visit  
Management Agents  
The Management Agents form the foundation for HP's Intelligent Manageability strategy.  
They provide direct, browser-based access to in-depth instrumentation built into HP servers,  
workstations, desktops, and portables, and send alerts to HP Systems Insight Manager and  
other enterprise management applications in case of subsystem or environmental failures.  
For additional information about the Management Agents and other management  
products from HP, please visit the management Web site at  
Subscriber's Choice  
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email  
subscription service that provides software and driver change notifications for ProLiant  
and customize your profile to receive various new alerts as they become available, on a  
weekly or monthly basis.  
ROMPaq, support software,  
and  
configuration utilities  
The latest software, drivers, and firmware fully optimized and tested for your ProLiant server  
and options, available in the RDP CD, SmartStart or downloadable from Software and  
Drivers download pages, linked from the SmartStart website at  
Survey Utility and diagnostics The most advanced configuration analysis, reporting and troubleshooting utilities used by  
utilities HP and at your fingertips, available in SmartStart.  
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL:  
O ptional ProLiant  
Essentials Value Packs  
Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business  
problems and needs:  
Workload Management Pack - provides easier management of complex environments, improving overall server  
utilization and enabling Windows® 2000 customers for the first time to confidently deploy multiple applications on  
a single multiprocessor ProLiant Server.  
Performance Management Pack - a performance management solution that identifies and explains hardware  
performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable  
resources.  
Intelligent Networking Pack - detects and analyzes network bottlenecks or broken networking linkages and steers  
traffic to the optimum route based on network conditions.  
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to  
http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more  
information.  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 7  
QuickSpecs  
Standard Features  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
Sm artStart  
SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server  
configurations. SmartStart 7.00 and later can now deploy the ProLiant BL20P G3 and ProLiant BL40P servers, using the I/O  
port with an attached USB CD-ROM device. To obtain a copy of SmartStart for your blade server, redeem the coupon that is  
included with your Blade server or order your copy from the SmartStart web site. For more information, please visit the  
SmartStart Web site at http://www.hp.com/servers/smartstart.  
SmartStart version supported (minimum): SmartStart 6.20  
Industry Standard  
Com pliance  
ACPI 1.0b compliant  
SDG 3.0 compliant  
Microsoft Logo certifications  
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757)  
groups 1, 2, 3, and 9, and Ethernet MIB (RFC1643) (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray  
option)  
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.3ac and 802.1Q, IEEE 802.1Q, and IEEE  
802.3x (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option)  
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9 (ProLiant BL e-Class C-GbE Interconnect Switch  
interconnect tray option)  
Intelligent M anageability Insight Manager 7  
HP Systems Insight Manager  
ROM Based Setup Utility (RBSU)  
Automatic Server Recovery (ASR-2)  
Enclosure Self Recovery (ESR)  
Advanced Configuration and Power Interface Specification Ready (ACPI)  
Server Blade and Enclosure Health Logs  
Redundant Power Supply Utility  
Power Down Utility  
Pre-Failure Warranty (covers processors, hard drives and memory)  
HP Interconnect Switch Management System and Utilities (included with the ProLiant BL e-Class C-GbE Interconnect  
Switch interconnect tray option)  
A va ila b ility  
Redundant Hot-Plug Power Supplies (ProLiant BL e-Class Server Blade Enclosure)  
Redundant Hot-Plug Fans (ProLiant BL e-Class Server Blade Enclosure)  
ECC Memory (ProLiant BL10e Server Blade)  
Redundant ROM (ProLiant BL10e Server Blade)  
Support for ProLiant network adapter teaming  
Dual network communication paths to each server blade using redundant, non-blocking layer 2 switch modules  
Redundant inter-module communication links  
Two redundant uplink ports per each interconnect switch module  
IEEE 801.1D Spanning tree protocol for loop-free path redundancy  
Redundant configurable community strings and SNMP trap manager hosts  
IEEE 802.3ad automatic multi-link load balancing and link failover (excluding LACP)  
Security  
Power-on password  
Administrator's password  
Secure Shell (SSH) access through the Integrated Administrator serial console  
ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option security  
Multilevel user names and passwords with configurable time out period setting  
Ability to disable web-based and Telnet access to the switch user interfaces  
256 IEEE 802.1Q tagged VLANs per interconnect switch module  
Unicast and multicast static MAC address packet filtering table (layer 2 access control list)  
Ability to specify the IP based management stations that are allowed to access each switch  
Restriction on the maximum number of MAC addresses learned on a per port basis  
Secure shell (SSH) access to the switch command line and menu driven interfaces via the Integrated Administrator  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 8  
QuickSpecs  
Standard Features  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
O S Support  
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit OS Support Matrix at:  
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at  
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at  
Rack Airflow Requirem ents Rack 10000 series Cabinets  
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted  
servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded  
with servers using the latest processors.  
CAUTIO N: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to  
prevent damage to the equipment  
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830  
square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required  
64 percent open area for ventilation).  
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7  
cm (2.75 inches)  
CAUTIO N: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement  
ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.  
NOTE: Please consult the Setup & Installation Guide for the server for additional details.  
Service and Support  
Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives, memory  
and processors). The warranty is fully supported by HP Services and a worldwide network of resellers and service providers. In  
addition 90-day's getting started software telephone support may be covered under the warranty or available for an  
additional fee. Enhancements to warranty services are available through HP Care Pack services.  
NOTE: Sever Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.  
NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site  
support.  
Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business  
requirements, from basic to mission-critical.  
A full range of HP Care Pack hardware and software services are available including:  
Installation and start up  
Education courses  
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window  
with options including 4-hour response or 6-hour Call To Repair  
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT  
solutions helping to deliver high level of application availability. Response times range from 30 mins for critical  
problems to 2 hours.  
System Management, Performance Services and Mission Critical Support Solution  
HP Care Pack services for ProLiant BL p-Class server blades, cover the server blade and the p-Class blade enclosure that the  
server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution.  
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our  
worldwide Web site on the internet at: http://www.hp.com/hps/carepack  
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at:  
NOTE: Additional information regarding worldwide limited warranty and technical support is available at:  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 9  
QuickSpecs  
Models  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
ProLiant BL10e G 2  
P1G Hz-1M B (ULV), 512-  
MB, 40-GB ATA  
333773-B21 (1 pack)  
333774-B21 (10 pack)  
Processor  
                                                               
                                                                 
                                                                   
                                                                     
                                                                       
                                                                         
                                                                          
                                                                             
One Ultra-Low Voltage Intel Pentium M 1GHz processor  
1-MB Level-2 on-die cache  
Cache Memory  
Memory  
512 MB (Standard) to 1024 MB (Maximum) PC2100 Registered ECC DDR DIMM Memory  
standard (1x512 MB)  
Network Controller  
Hard Drive  
Two NC3163 Fast Ethernet NIC PCI 10/100 full WOL and PXE Integrated  
One 40-GB Ultra ATA/100 5,400 rpm Non-Hot Plug 2.5" hard drive  
Plugs vertically into HP ProLiant BL10e G2 Server Blade Enclosure  
Form Factor  
 
DA - 11686 Worldwide — Version 13 — October 8, 2004  
Page 10  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
ProLiant BLe-C lass  
U nique O ptions  
Four (4) RJ-21 to RJ-45 cables for use with the RJ-21 Patch Panel interconnect tray  
(10 foot cables)  
257076-B21  
293119-B21  
Enclosure Shipping Bracket Kit  
NOTE: When shipping an enclosure in a rack shipping brackets must be installed to the rack.  
Server Blade Enclosure  
ProLiant BL e-Class Server Blade Enclosure  
243280-B21  
273644-B21  
ProLiant BL e-Class Server Blade Enclosure (includes 20 licenses for ProLiant Essentials Rapid  
Deployment Pack at 50% of the standard per-node license list price)  
Interconnect Trays (each  
includes an Integrated  
Adm inistrator m odule)  
Interconnect Tray, ProLiant BL e-Class C-GbE Interconnect Switch  
Interconnect Tray, RJ-21 Patch Panel  
243283-B21  
253177-B21  
243282-B21  
Interconnect Tray, RJ-45 Patch Panel  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 11  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
ProLiant Essentials  
Value Pack Software  
ProLiant Essentials Rapid Deployment Pack (1 node license, V1.1)  
NOTE: Each server blade bay slot populated by a server blade requires one license.  
267196-B21  
ProLiant Essentials Rapid Deployment Pack (10 node license, V1.1)  
NOTE: Rapid Deployment pack is now available in Linux only environments.  
269817-B21  
302127-B21  
Flexible-Quantity License Kit  
NOTE: For use with multiple servers. This part number can be used to purchase multiple licenses  
with a single activation key. The quantity ordered of this part number will be the quantity of licenses  
included in the kit in the form of a corresponding activation key. Use the same key to activate all  
licenses in the actual quantity ordered. For a given order, one kit will be delivered with the activation  
key, and documentation  
AKA Tracking License  
302128-B21  
NOTE: For use with signed and implemented Activation Key Agreements only. Purchase of this part  
number entitles the customer to deploy additional licenses of the product under the terms of the  
existing Activation Key Agreement. Nothing is delivered in conjunction with the purchase of this part  
more information on Activation Key Agreements.  
ProLiant Essentials Workload Management Pack  
(Featuring Resource Partitioning Manager version 2.0)  
303284-B21  
374055-B21  
ProLiant Essentials Performance Management Pack, 10-Server License  
NOTE: For use with 10 servers. Contains 10 licenses with one unique license  
activation key and documentation.  
ProLiant Essentials Performance Management Pack, Single-Server License  
NOTE: For use with a single server. Contains one license with a unique license  
activation key and documentation.  
306696-B21  
306697-B21  
ProLiant Essentials Performance Management Pack, Flexible-Quantity License  
NOTE: For use with multiple servers. This part number can be used to purchase multiple licenses  
with a single activation key. The quantity ordered of this part number will be the quantity of licenses  
included in the kit in the form of a corresponding activation key. Use the same key to activate all  
licenses in the actual quantity ordered. For a given order, one kit will be delivered with the activation  
key, and documentation  
ProLiant Essentials Intelligent Networking Pack, Single Server License  
NOTE: For use with a single server. Contains one license with a unique license activation key and  
documentation.  
372906-B21  
372950-B21  
ProLiant Essentials Intelligent Networking Pack, Flexible License  
NOTE: For use with multiple servers. This part number can be used to purchase multiple licenses  
with a single activation key. The quantity ordered for this part number will be the quantity of licenses  
included in the kit in the form of a corresponding activation key. Use the same key to activate all  
licenses in the actual quantity ordered. For a given order, one kit will be delivered with the activation  
key, and documentation.  
ProLiant Essentials Intelligent Networking Pack, Tracking License  
372951-B21  
NOTE: For use with signed and implemented Activation Key Agreements only. Purchase of this part  
number entitles the customer to deploy additional licenses of the product under the terms of the  
existing Activation Key Agreement.  
NOTE: Nothing is delivered in conjunction with the purchase of this part number. Visit  
for more information on Activation Key Agreements.  
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL:  
Memory  
(SDRAM DIMMs)  
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)  
256MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)  
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)  
287494-B21  
287495-B21  
287496-B21  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 12  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
UPS and PDU Power Cord Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU  
M atrix  
units:  
U ninterruptible Power  
System s- Rack  
HP UPS R1500 XR (1440VA, 1340 Watt), Low Voltage (NA)  
HP UPS R1500 XR (1500VA, 1340 Watt), High Voltage (Int'l)  
HP UPS R1500 XR (1500VA, 1340 Watt), Low Voltage (Japan)  
HP UPS R3000 XR (2880VA, 2700 Watt), Low Voltage (NA)  
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (NA)  
HP UPS R3000 XR (2400VA, 2250 Watt), Low Voltage (Japan)  
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Japan)  
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (Int'l – detachable cord)  
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A IEC309 Plug)  
204404-001  
204404-B31  
204404-291  
192186-001  
192186-002  
192186-291  
192186-292  
192186-B31  
192186-B32  
192186-B33  
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage  
(16A CEE 7/7 SCHUKO Plug)  
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A BS-546 Plug)  
192186-AR1  
347207-001  
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (NA)  
NOTE: The UPS R6000 has a hardwired input.  
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (Int'l)  
NOTE: The UPS R6000 has a hardwired input.  
347207-B31  
347207-291  
207552-B22  
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage (Japan)  
NOTE: The UPS R6000 has a hardwired input.  
UPS R12000 XR N+ x (200-240V) (WW-hardwired)  
NOTE: The UPS R12000 XR has a hardwired input and output.  
UPS O ptions  
SNMP Serial Port Card  
NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.  
192189-B21  
192185-B21  
218971-B21  
192188-B21  
347224-B21  
217800-B21  
325361-001  
325361-B21  
347225-B21  
Six Port Card  
NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA.  
Extended Runtime Module, R1500 XR  
NOTE: 2U each, two ERM maximum.  
Extended Runtime Module, R3000 XR  
NOTE: 2U each, one ERM maximum.  
Extended Runtime Module, R6000  
NOTE: 3U each, two ERM maximum.  
Extended Runtime Module, R12000 XR, 4U  
NOTE: 4U each, two ERM maximum.  
R12000 XR BackPlate Receptacle Kit, (2) L6-30R (NA)  
NOTE: The R12000 XR BackPlate Kit has a hardwired input.  
R12000 XR BackPlate Receptacle Kit, (2) IEC-309R (WW)  
NOTE: The R12000 XR BackPlate Kit has a hardwired input.  
SNMP-EN Adapter  
NOTE: Supports R6000 UPS series only.  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 13  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
M odular PDUs 1U/0U  
(U p to 32 outlets)  
HP Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC)  
(NA, Japan)  
252663-D71  
NOTE: This mPDU (252663-D71) may also be used to connect the low volt model of the UPS  
R3000 XR.  
NOTE: 1U/0U mounting  
brackets shipped with the unit  
(optimized for 10000 and 9000  
series racks).  
HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)  
(NA, Japan)  
252663-D72  
HP Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l)  
252663-B31  
252663-B21  
HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC) (WW)  
NOTE: This mPDU (252663-B21), 40A model has a hardwired input.  
HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW)  
NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific  
power requirements (country-specific cord needs to be ordered separately; for North America, need IEC  
C19 to L6-20P power cord PN: 340653-001). This model may also be used with the high volt UPSs  
R3000 XR and R6000.  
252663-B24  
NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs)  
QuickSpecs for additional options including shorter jumper cables and country specific power cords:  
(North America)  
(Worldwide)  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 14  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
USB O ptions  
USB Easy Access Keyboard (carbon)  
USB Easy Access Keyboard (Carbon) Country Key Code  
267146-xx8  
Dash #  
-008  
-038  
-048  
-058  
-068  
-078  
-088  
-098  
-108  
-128  
-138  
-148  
-158  
D escription  
US  
Dash #  
-178  
-188  
-218  
-228  
-238  
-248  
-258  
-298  
-338  
-358  
-B38  
-B48  
D escription  
Arabic  
Belgium  
Hungary  
Czech  
UK  
Germany  
France  
Italy  
Slovac  
Polish  
Spain  
Denmark  
Norway  
Russian  
Japan  
Sweden/Finland  
French Canadian  
Portugal  
Turkey  
Dutch  
Finish  
Int'l  
BHCSY  
Greek  
USB Easy Access Keyboard (carbonite)  
USB Easy Access Keyboard (carbonite) Country Key Code  
DC168B#  
Dash #  
A2M  
AB0  
AB1  
AB2  
AB6  
AB7  
AB8  
AB9  
ABA  
ABB  
ABC  
ABD  
ABE  
ABF  
ABH  
ABJ  
D escription  
ICELAND  
TAWA  
KOR  
PRC  
Dash #  
ABT  
D escription  
HE  
ABU  
ABV  
ABX  
UK  
ARA  
FIN  
FR A  
GRK  
ABY  
ABZ  
AC0  
AC4  
ACB  
AKB  
AKC  
AKD  
AKL  
DEN  
ITL  
TURK  
PORT  
US  
BEL  
BRZ  
RUSS  
CZE  
EURO  
FCAN  
GR  
HUNG  
POL  
SP  
THAI  
BHCSY  
SLOV  
ICELAND  
KAZ  
FR  
AKN  
AKR  
ARK  
B15  
NL  
Japan  
LA  
ABM  
ABN  
ABS  
NOR  
SW  
UUZ  
SWISS  
USB 2-Button Scroll Mouse (carbon)  
USB 2-Button Scroll Mouse (carbonite)  
USB Floppy  
195255-B25  
DC172B  
304707-B21  
 
DA - 11686 Worldwide — Version 13 — October 8, 2004  
Page 15  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
HP StorageW orks ESL9000 Series Tape Libraries  
ESL9595 Extended Tape Library, 0 drive, 400 slots (card cage, Interface Mgr card, Command View  
Tape Libraries  
343378-B21  
license)  
ESL9595 Library, 0 drive, 400 slots  
330833-B21  
343377-B21  
ESL9322 Extended Tape Library, 0 drive, 222 slots (card cage, Interface Mgr card, Command View  
license)  
ESL9595 Library, 0 drive, 222 slots  
330832-B21  
330834-B21  
301930-B21  
293414-B21  
330842-B21  
330842-B22  
330842-B23  
330840-B21  
330839-B21  
343375-B21  
343376-B21  
ESL9000 Ultrium 460 drive kit  
ESL9000 Ultrium 230 drive kit  
ESL9000 SDLT 320 drive kit  
ESL9000 400 to 500 slot upgrade  
ESL9000 500 to 595 slot upgrade  
ESL9000 400 to 595 slot upgrade  
ESL9000 222 to 322 slot upgrade  
ESL9000 E2400-160 FC Interface Controller (one controller for every four drives)  
License for Direct Backup Engine ESL  
License for Secure Manager ESL  
NOTE: Please reference the ESL9000 Series Tape Libraries QuickSpecs at  
http://www.hp.com/go/automation for additional information needed to create a complete solution;  
reference current compatibility information at http://www.hp.com/go/ebs  
C ustom Builder  
Please see the Enterprise Configurator for configuration assistance at: http://www.hp.com/products/configurator.  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 16  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
S10614 (14U) Rack Cabinet - Shock Pallet  
HP Rack 10647 (47U) – Pallet  
292302-B22  
245160-B21  
245160-B23  
245161-B21  
245161-B22  
245161-B23  
245162-B21  
245162-B22  
245162-B23  
245163-B21  
245163-B22  
245163-B23  
HP Rack 10000 Series  
(Graphite Metallic)  
HP Rack 10647 (47U) – Crated  
HP Rack 10642 (42U) – Pallet  
HP Rack 10642 (42U) – Shock Pallet  
HP Rack 10642 (42U) – Crated  
HP Rack 10636 (36U) – Pallet  
HP Rack 10636 (36U) – Shock Pallet  
HP Rack 10636 (36U) – Crated  
HP Rack 10622 (22U) – Pallet  
HP Rack 10622 (22U) – Shock Pallet  
HP Rack 10622 (22U) – Crated  
NOTE: -B21 (pallet) used to ship empty racks shipped on a truck  
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and  
Channels)  
-B23 (crated) used for air shipments of empty racks  
NOTE: Not all HP equipment is qualified to be shipped in the Rack 10000 series.  
NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width,  
depth, weight, and color:  
(Worldwide)  
(North America)  
NOTE: For additional information regarding Rack Cabinets, please see the following URL:  
Rack O ptions for H P  
Rack 10000 Series  
HP Light kit for 10000 series rack  
361589-B21  
251960-B21  
255488-B21  
HP Plinth kit for 10000 series rack  
800mm Wide Stabilizer Kit (Graphite)  
NOTE: Supported by the Rack 10842 cabinet only.  
600mm Stabilizer Kit – Graphite  
246107-B21  
248929-B21  
246099-B21  
257413-B21  
Baying Kit for Rack 10000 series (Carbon)  
42U Side Panel – Graphite Metallic  
110V Fan Kit (Graphite)  
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P.  
220V Fan Kit (Graphite)  
257414-B21  
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P.  
36U Side Panel – Graphite Metallic  
246102-B21  
255486-B21  
248931-B21  
47U Side Panel – Graphite Metallic  
9000/10000 Series Offset Baying Kit (42U)  
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together.  
Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of  
the two racks.  
NOTE: For additional information regarding Rack Options, please see the following URL:  
Ballast Option Kit  
120672-B21  
248931-B21  
9000/10000 Series Offset Baying Kit (42U)  
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together.  
Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of  
the two racks.  
NOTE: For additional information regarding Rack Cabinets, please see the following URL:  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 17  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
Rack Rail Adapter Kit (25" depth)  
120675-B21  
234672-B21  
253449-B21  
332558-B21  
168233-B21  
400336-001  
400336-B31  
400336-291  
262585-B21  
262586-B21  
110936-B21  
110936-B24  
110936-B25  
263474-B21  
263474-B22  
263474-B23  
263474-B24  
263474-B25  
144007-B33  
221546-xx1  
348373-B21  
100 kg Sliding Shelf  
Monitor/Utility Shelf - Graphite  
Depth Adjustable Fixed Rail  
Cable Management D-Rings Kit  
Server Console Switch 1 x 4 port (100-230 VAC)  
Server Console Switch 1 x 4 port (100-230 VAC) (Int’l)  
Server Console Switch 1 x 4 port (100-230 VAC) (Japan)  
IP Console Switch Box, 1 x 1 x 16  
IP Console Switch Box, 3 x 1 x 16  
CPU to Server Console Cable, 12’  
CPU to Server Console Cable, 3’  
CPU to Server Console Cable, 7’  
IP CAT5 Cable 3’, 4 pack  
IP CAT5 Cable 6’, 8 pack  
IP CAT5 Cable 12’, 8 pack  
IP CAT5 Cable 20’, 4 pack  
IP CAT5 Cable 40’, 1 pack  
Switch Box Connector Kit (high voltage) (Int'l)  
TFT5600 Rack Keyboard Monitor  
TFT7210R Rack Mounted 17" Monitor  
NOTE: For a complete list of Monitors please view the following URL:  
1U Rack Keyboard & Drawer (Carbon)  
257054-xx1  
C ountry C ode Key (for 1U Rack Keyboard & Drawer (PN 257054-xx1))  
XX = 001  
XX = 031  
XX = 041  
XX = 051  
XX = 061  
XX = 071  
XX = 081  
US  
XX = 091  
XX = 101  
XX = 111  
XX = 131  
XX = 181  
XX = 291  
XX = B31  
Norway  
UK  
Sweden/Finland  
Switzerland  
Portugal  
Germany  
France  
Italy  
Belgium  
Spain  
Denmark  
Japan  
International  
NOTE: For additional information regarding Rack Options, please see the following URL:  
Rack O ptions for H P,  
Com paq-branded, Third  
Party and Telco racks  
Telco rack-mounting hardware kit for ProLiant BL e-Class Server Blade Enclosure  
266076-B21  
293119-B21  
Enclosure Shipping Bracket Kit  
NOTE: When shipping an enclosure in a rack shipping brackets must be installed to the rack.  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 18  
QuickSpecs  
Options  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
Service and Support  
O fferings (HP Care Pack  
Services)  
NOTE: The HP Care Pack services for ProLiant BL e-Class server blades cover the server blade and  
the e-Class blade enclosure that the server blade is installed in as well as the interconnect tray.  
Hardware Services O n-site Service  
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years  
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years , Electronic  
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years  
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic  
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years  
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic  
Installation & Start-up Services  
UA220A  
UA220E  
UA221A  
UA221E  
UA222A  
UA222E  
ProLiant BL e-Class Blade Server Hardware Installation  
UA227A  
UA227E  
U4960A  
U4960E  
U5683A  
ProLiant BL e-Class Blade Server Hardware Installation, Electronic  
ProLiant BL e-Class Enclosure and Server Blade Hardware Installation  
ProLiant BL e-Class Enclosure and Server Blade Hardware Installation, Electronic  
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer  
supplied server designated as a Deployment Server. Includes the deployment of a single server. This  
new server will be deployed using either one of the pre-configured scripts or an image. In addition,  
the service will provide for the capture and storage of the configuration of the newly deployed server  
and orientation on product usage. To be delivered during standard office ours, standard office days.  
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer  
supplied server designated as a Deployment Server. Includes the deployment of a single server. This  
new server will be deployed using either one of the pre-configured scripts or an image. In addition,  
the service will provide for the capture and storage of the configuration of the newly deployed server  
and orientation on product usage. To be delivered during standard office ours, standard office days.  
Electronic.  
U5683E  
NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 19  
QuickSpecs  
Memory  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
ProLiant BL10e G 2 Server Blade  
STANDARD MEMORY  
512-MB PC2100 Registered ECC DDR DIMM Memory installed (1 x 512-MB SDRAM DIMM)  
STANDARD M EM O RY PLUS O PTIO NAL M EM O RY  
Up to 1024 MB PC2100 Registered ECC DDR DIMM Memory is available with the installation of optional SDRAM DIMM memory expansion kits.  
Memory  
Slot  
1
2
Standard  
O ptional  
O ptional  
M aximum  
512 MB  
640 MB  
768 MB  
1024 MB  
512 MB  
512 MB  
512 MB  
512 MB  
Em pty  
128 MB  
256 MB  
512 MB  
Following are memory options available from HP:  
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)  
256MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)  
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)  
287494-B21  
287495-B21  
287496-B21  
 
DA - 11686 Worldwide — Version 13 — October 8, 2004  
Page 20  
QuickSpecs  
Technical Specifications  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
HP ProLiant BL10e G 2  
Server Blade Enclosure  
D im ensions  
                                                                 
                                                                  
                                                                     
                                                                       
                                                                          
                                                                           
                                                                            
                                                                               
                                                                                 
Height  
5.25 in (13.35 cm) (3U)  
17.5 in (44.45 cm)  
28.35 in (72.01 cm)  
4.5 lb (2.04 kg)  
Width  
Depth  
W eight  
Interconnect Tray  
20 server blades  
35 lb (15.86 kg)  
Enclosure with 2 power supplies 54.5 lb (24.7 kg)  
Total weight fully loaded 94 lb (41.73 kg)  
Power Supply  
600W , Hot-Plug  
Redundant  
Two Redundant Power Supplies (optimized to provide full redundancy at 120 and 220  
volts)  
(2 standard)  
Input Specifications  
Normal Line Voltage  
Range Input Line  
Frequency Range  
Power Factor  
100 to 127VAC, 200 to 240VAC  
90 to 264VAC  
43 to 63Hz  
> 0.95 (120Vac/Max Load)  
Input Current  
8.5A @ 120VAC, 4.3A @ 240VAC  
Inrush Current  
25A  
Holdup Time  
25mS  
600W  
G eneral Specifications  
Full Output Rating  
Minimum Load  
Input to Output  
Input to Ground  
D ielectric Voltage  
W ithstand  
1500Vac or 2150Vdc (1 Min.)  
1500Vac or 2150Vdc (1 Min.)  
2200V  
Input Transient  
Susceptibility  
Common and Differential  
Mode (superimposed on AC  
line)  
Differential Mode  
1100V  
NOTES: ProLiant BL e-Class Power Calculator is available from the product page at the following address:  
Click "Power Calculator" in the "Support" section.  
N on-H ot Plug U ltra  
ATA/100 Hard Drives  
40 GB 5.4 K  
C apacity  
H eight  
40,007 MB  
0.374 in (9.5 mm)  
2.756 in (70 mm)  
Ultra ATA-5 (IDE) 100 MB/s  
W idth  
Interface  
Transfer Rate Synchronous 27.8 to 44.1 MB/sec (Disk-Buffer)  
(Maximum)  
Seek Time  
Single Track  
13 ms  
(typical reads, including  
settling)  
Rotational Speed  
Bytes/Sector  
5,400 RPM  
512  
Physical C onfiguration  
Logical Blocks  
78,140,160 (LBA)  
 
DA - 11686 Worldwide — Version 13 — October 8, 2004  
Page 21  
QuickSpecs  
Technical Specifications  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
Two NC3163 Fast  
Network Interface  
                                                                 
                                                                   
                                                                    
                                                                       
                                                                         
                                                                           
                                                                              
                                                                               
                                                                                 
                                                                                  
                                                                                    
                                                                                     
                                                                                       
                                                                                         
                                                                                           
10Base-T/100Base-TX  
Ethernet NIC Em bedded  
10/100 WOL (Wake on LAN)  
C om patibility  
IEEE 802.3/802.3u compliant  
32-bit bus-master PCI  
Data Transfer M ethod  
Network Transfer Rate  
10Base-T (Half-Duplex)  
10Base-T (Full-Duplex)  
100Base-TX (Half-Duplex)  
100Base-TX (Full-Duplex)  
10 Mb/s  
20 Mb/s  
100 Mb/s  
200 Mb/s  
Connector  
Mates into enclosure center wall assembly  
Cable Support  
10Base-T  
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)  
Category 5 UTP; up to 328 ft (100 m)  
100Base-TX  
H P ProLiant BL  
e-Class C-G bE  
Interconnect Switch  
General  
Two 24-port Managed Layer 2 Ethernet switches for server network cable reduction  
Fully pre-configured for immediate operation  
Performance  
4.0 Gbps Switching bandwidth  
12 Million pps aggregate throughput (64-byte packets)  
Full-wire speed for all connections  
Forwarding M ode  
MAC Addresses  
Memory  
Store and forward  
16,382; MAC address based filtering and MAC address packet priority configuring  
64MB Main  
12MB Flash  
32MB Packet Buffer  
Ports  
Four RJ-45 10/100/1000 T/TX/T Gigabit Ethernet uplink ports for customer use  
Forty 10/100 T/TX fast Ethernet downlink ports dedicated to server blade to interconnect  
switch network connections  
Two 10/100 T/TX Fast Ethernet ports dedicated to inter-switch module communications  
One RS-232 DB-9 port (console connector for Integrated Administrator)  
One 10/100 T/TX Fast Ethernet port (Network management connector for Integrated  
Administrator)  
Auto-negotiation and auto-sensing with full-duplex  
Management  
Web-based interface with graphical user interface  
Console menu driven Interface via local RS-232 and Telnet  
Scriptable command line interface (CLI)  
SNMP v1 (RFC 1157) with scripting tool and example scripts  
RMON v1 (RFC 1757) groups 1, 2, 3, and 9  
Telnet (RFC 854)  
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC  
2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9, Ethernet MIB (RFC1643) and HP-  
specific switch MIBs  
64 Port-based IEEE 802.1Q tagged VLANs per switch module  
XML human read/write configuration file  
TFTP client (RFC 783) for backup and remote download of configuration and history log  
files  
IGMP (Internet Group Management Protocol) multicasting  
EtherChannel (Fast EtherChannel, GigaChannel) compatible trunking  
Uplink port speed and link activity LEDs  
Simple network time protocol (SNTP)  
Broadcast, multicast, and DA-unknown packet storm control  
BootP and DHCP client support  
BootP and DHCP client support  
Port mirroring  
IEEE Standards  
Com pliance  
IEEE 802.3 10Base-T Ethernet  
IEEE 802.3u 100Base-TX Ethernet  
IEEE 802.3ab 1000Base-T Ethernet  
IEEE 802.1D Spanning Tree Protocol  
IEEE 802.1p Quality of Service (QoS) Packet Prioritization  
IEEE 802.3ac and 802.1Q Port Based Tagged VLANs and VLAN Extensions  
 
DA - 11686 Worldwide — Version 13 — October 8, 2004  
Page 22  
QuickSpecs  
Technical Specifications  
HP ProLiant BL10e Generation 2 (G2) Server Blade  
IEEE 802.1Q Trunking Encapsulation  
IEEE 802.3x Flow Control  
Form Factor  
Removable interconnect tray that plugs into the rear of the server blade enclosure  
Network Transfer Rate  
10Base-T (Half-Duplex)  
10Base-T (Full-Duplex)  
100Base-TX (Half-Duplex)  
100Base-TX (Full-Duplex)  
1000Base-T (Full-Duplex)  
1000Base-T (Full-Duplex)  
10Base-T  
10 Mb/s  
20 Mb/s  
100 Mb/s  
200 Mb/s  
2000 Mb/s  
2000 Mb/s  
Cable Support  
Categories 3, 4 or 5 UTP;up to 328 ft (100 m)  
Category 5 UTP; up to 328 ft (100 m)  
Category 5 UTP; up to 328 ft (100 m)  
100Base-TX  
1000Base-T  
© Copyright 2004 Hewlett-Packard Development Company, L.P.  
The information contained herein is subject to change without notice.  
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.  
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein  
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.  
 
DA - 11686  
Worldwide — Version 13 — October 8, 2004  
Page 23  

Graco Baby Accessories 1751557 User Manual
Graco Baby Accessories 1760706 User Manual
Hamilton Beach Coffeemaker 48131 User Manual
Hamilton Beach Iron 14515R User Manual
Honeywell Humidifier HWM 331 User Manual
Hoshizaki Ice Maker DCM 500BAH User Manual
Hotpoint Dishwasher FDM 550 User Manual
HP Hewlett Packard Network Card 5991 6764 User Manual
HP Hewlett Packard Photo Scanner N6350 User Manual
IBM Car Video System T120 User Manual