Harbor Freight Tools Patio Umbrella 93660 User Manual

9’ UMBRELLA  
w/Aluminum Pole  
93660  
Materials:  
100% polyester, antique beige  
colored fabric. UV treated, mil-  
dew resistant with eight ribs, 9  
ft. long, and an aluminum pole  
with a tilt mechanism that will  
angle at a 45 degree angle, left  
or right.  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
®.  
Copyright © 2005 by Harbor Freight Tools  
All rights reserved. No portion of this manual or any artwork contained herein  
may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.  
UNPACKING  
When unpacking, check to make sure all parts shown on the back of this instruction sheet are included. If any parts are missing or  
broken, please call Harbor Freight Tools at the number shown on the front of this sheet as soon as possible.  
ASSEMBLY AND OPERATING INSTRUCTIONS  
NOTE: All parts below refer to the parts listed on the reverse side of this instruction sheet.  
1. Caution: DO NOT attempt to use this Umbrella in moderate or high wind conditions. Doing so may cause personal injury  
and/or damage to the Umbrella and personal property. Be careful not to pinch fingers when opening and closing the Umbrella.  
2. To assemble, insert Lower Pole (8) with its threaded end upward, securely into a heavy duty umbrella stand.  
NOTE: This Umbrella is intended for use only with a heavy duty umbrella stand which is not provided with this product.  
Adjustable, heavy duty umbrella stands are sold separately by special order from Harbor Freight Tools (SKU 94041).  
3. Screw the Connector/Crank (7) onto the threaded end of the Lower Pole.  
4. Screw the Upper Pole (6), with its pre-attached upper umbrella assembly, securely into the top of the Connector/Crank.  
5. Hand crank the Connector/Crank clockwise in order to raise the Hub/Runner (5)  
above the self-locking Safety Lock (10), thereby locking the upper umbrella  
assembly into place. The Umbrella is now ready for use.  
Hub/Runner (5)  
6. If you wish to tilt the upper part of the umbrella for shade, press the “push  
Push Button (9)  
button”. It will tilt to a 45 degree angle. To straighten up, reverse the tilt until the  
tilt mechanism “clicks” into place for safety. Note: When tilting, opening, or  
closing the umbrella, watch your head for injuries. See Figure 1.  
7. When finished using the Umbrella, crank the Connector/Crank counterclockwise  
until the upper umbrella assembly is completely closed.  
Figure 1  
CLEANING AND MAINTENANCE  
1. To clean, fully open the Umbrella. Wipe with a clean, damp cloth, using a mild soap with water if necessary.  
2. Periodically, lightly lubricate all moving parts.  
SEE REVERSE SIDE OF THIS INSTRUCTION SHEET FOR PRODUCT WARNINGS,  
PRECAUTIONS, PARTS LIST, AND ASSEMBLY DIAGRAM.  
 

Graco Inc Power Roller 244279 User Manual
Grizzly Car Seat H6166 User Manual
Grizzly Log Splitter H8170 H8171 User Manual
Grundig CRT Television ST 55 839 User Manual
Grundig DVR 5550 HDD User Manual
Hasbro Robotics 83967 User Manual
Honeywell Car Amplifier R4140G User Manual
Honeywell Frozen Dessert Maker 5080 User Manual
Husqvarna Tiller 650CRT User Manual
iLive Speaker System iHMD8816DT E1 User Manual