Hotpoint Range SBS 638 CX S User Manual

SBS 638 CX S  
English  
Operating Instructions  
OVEN  
Contents  
Operating Instructions,1  
Warnings,2  
Description of the appliance,3  
Installation,4  
Electrical Connection,5  
Start-up and use,6  
Modes,6  
The electronic programmer*,9  
Precautions and tips,10  
Maintenance and care,10  
Afetr Sales Service,12  
Guarantee,13  
08448 24 24 24  
Please phone us on  
 
guarantee  
to activate your  
Description of the appliance  
GB  
Overall view  
9
6
1. POSITION 1  
2. POSITION 2  
3. POSITION 3  
4. POSITION 4  
5. POSITION 5  
6. GUIDES for the sliding racks  
7. DRIPPING PAN  
8. GRILL  
8
5
3
1
4
7
2
9. Control panel  
Control panel  
1.  
2.  
3.  
4.  
SELECTOR Knob  
ELECTRONIC programmer*  
THERMOSTAT Knob  
Indicator light THERMOSTAT  
1
4
3
2
* Only available in certain models.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
3
 
Centring and fixing  
Secure the appliance to the cabinet:  
Installation  
! Please keep this instruction booklet in a safe place for future reference. If  
the appliance is sold, given away or moved, please make sure the booklet is  
also passed on to the new owners so that they may benefit from the advice  
contained within it.  
GB  
Open the oven door.  
Remove the 4 rubber plugs covering the fixing holes on the perimeter  
frame.  
Fix the oven to the cabinet using the 4 wood screws.  
Replace the rubber plugs.  
!Please read this instruction manual carefully: it contains important information  
concerning the safe operation, installation and maintenance of the appliance.  
Positioning  
! Do not let children play with the packaging material; it should be disposed  
of in accordance with local separated waste collection standards (see  
Precautions and tips).  
! The appliance must be installed by a qualified professional in accordance  
with the instructions provided. Incorrect installation may damage property or  
cause harm to people or animals.  
! All parts which ensure the safe operation of the appliance must not be  
Built-in appliances  
Use an appropriate cabinet to ensure that the appliance operates properly:  
removable without the aid of a tool.  
The panels adjacent to the oven must be made of heat-resistant material.  
Cabinets with a veneer exterior must be assembled with glues which can  
withstand temperatures of up to 100°C.  
To install the oven under the counter (see diagram) or in a kitchen unit,  
the cabinet must have the following dimensions:  
Electrical Connection  
The electrical connection to the mains must be made on the appliance. The  
power voltage and frequency are as indicated on the rating plate.  
! THIS APPLIANCE MUST BE EARTHED.  
Fitting the power supply cable  
550 mm.  
min.  
1. Open the terminal board by  
inserting a screwdriver into the side  
tabs of the cover. Use the screwdriver  
as a lever by pushing it down to open  
the cover (see diagram)  
.
2. Install the power supply cable by  
loosening the cable clamp screw  
and the three wire contact screws  
! The appliance must not come into contact with electrical parts once it has  
been installed. The indications for consumption given on the data plate have  
been calculated for this type of installation.  
L-N-  
.
N
L
Connect the wires to the  
corresponding terminals: the Blue  
wire to the terminal marked (N), the  
Brown wire to the terminal marked  
(L) and the Yellow/Green wire to the  
Ventilation  
To ensure adequate ventilation, the back panel of the cabinet must be  
removed. It is advisable to install the oven so that it rests on two strips of  
wood, or on a completely flat surface with an opening of at least 45 x 560  
mm (see diagrams).  
terminal marked  
3. Secure the cable by fastening the  
clamp screw.  
4. Close the cover of the terminal  
board.  
(see diagram).  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
4
 
Electrical Connection:  
APPLIANCE SPECIFICATIONS  
GB  
Voltage Frequency: see data plate  
Fuse Section: 16A  
width 43.5 cm  
Dimensions*  
Volume*  
height 32,4 cm  
depth 41.5 cm  
Supply cable: 3x1.5mm2  
59 l  
You can connect your oven to the system means of a terminal board. Refer  
to above information for the minimal cable sections and the calibration of the  
protective elements according to the connection.  
If the appliance is installed with a junction box, an omnipolar circuit breaker  
- with a minimum contact opening of 3mm - should be installed between the  
appliance and the mains.  
width 45.5 cm  
height 32,4 cm  
depth 41.5 cm  
Dimensions**  
Volume**  
62 l  
voltage: 230-240V~ 50/60Hz  
(see data plate) maximum power  
absorbed 2800-3000 W  
Electrical  
connections  
Power cable supply connection to the electrical mains:  
We recommend you use a power supply cable which is long enough to allow  
you to take the oven out of its recess in the event of maintenance operations  
(only use HAR - H 05 - RRF quality cables fitted with a plug conforming to  
the regulations in force.  
EU Directive no 65/2014  
supplementing Directive 2010/30/EU.  
EU Regulation no 66/2014  
implementing Directive 2009/125/EC.  
Standard EN 60350-1  
Energy  
The plug must be accessible at all times.  
Label e  
Standard EN 50564  
Ecodesign  
Energy consumption for Natural  
convection – heating mode:  
Traditional mode  
Unplug the appliance before all operations, even when replacing the  
oven lamp.  
Using the appliance without correct earthing is highly dangerous.  
Declared energy consumption for  
Forced convection Class  
! After connecting the appliance to the flexible cable, tighten all the  
screws on the terminal board.  
mode:  
Baking  
This appliance conforms to the  
following European Economic  
Community directives:  
- 2006/95/EC dated 12/12/06 (Low  
Voltage) and subsequent amendments.  
- 2004/108/EC dated 03/05/89  
(Electromagnetic Compatibility) and  
subsequent amendments.  
- 93/68/EEC dated 22/07/93 and  
subsequent amendments.  
- 2012/19/EU and subsequent  
amendments.  
* Only for models with drawn rails.  
** Only for models with wire rails.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
5
 
Start-up and use  
Modes  
GB  
WARNING! The oven is provided  
with a stop system to extract the  
racks and prevent them from coming  
out of the oven (1).As shown in the  
drawing, to extract them completely,  
simply lift the racks, holding them on  
the front part, and pull (2).  
! In order to guarantee wonderfully soft and crunchy foodstuffs, the oven  
releases – in the form of water vapour - the humidity naturally withheld in  
the food itself. In this way, optimal cooking results can be achieved for all  
types of food.  
! A temperature value can be set for all cooking modes between 60°C and  
Max, except for  
! The first time you use your appliance, heat the empty oven with its door  
closed at its maximum temperature for at least half an hour. Make sure that  
the room is well ventilated before switching the oven off and opening the  
oven door. The appliance may emit a slightly unpleasant odour caused by  
protective substances used during the manufacturing process burning away.  
GRILL (recommended: set only to MAX power level);  
GRATIN (recommended: do not exceed 200°C).  
TRADITIONAL OVEN mode  
Starting the oven  
Both the top and bottom heating elements will come on. With this traditional  
cooking mode, it is best to use one cooking rack only; if more than one rack  
is used, the heat will be distributed unevenly.  
1. Select the desired cooking mode by turning the SELECTOR knob.  
2. Select the desired temperature with the THERMOSTAT knob. See the  
Cooking advice table for cooking modes and the suggested cooking  
temperatures (see Cooking Modes).  
3. When lit, theTHERMOSTATindicator light indicates that the oven is heating  
up to the temperature set.  
MULTILEVEL mode  
4. You may do the following during cooking:  
All the heating elements (top and bottom), as well as the fan, will come on.  
Since the heat remains constant throughout the oven, the air cooks and  
browns food uniformly.Amaximum of two racks may be used at the same time.  
- change the cooking mode by turning the SELECTOR knob.  
- change the temperature by turning the THERMOSTAT knob.  
- stop cooking by turning the SELECTOR knob to the “0” position.  
! Never put objects directly on the oven bottom to avoid damaging the enamel  
coating.  
PIZZA OVEN mode  
The circular heating elements and the elements at the bottom of the oven are  
switched on and the fan is activated. This combination heats the oven rapidly  
by producing a considerable amount of heat, particularly from the element  
at the bottom. If you use more than one rack at a time, switch the position of  
the dishes halfway through the cooking process.  
! Always place cookware on the rack(s) provided.  
Cooling ventilation  
In order to cool down the external temperature of the oven, some models  
are fitted with a cooling fan that blows out air between the control panel and  
the oven door.  
GRILL mode  
! Once the cooking has been completed, the cooling fan remains on until the  
oven has cooled down sufficiently.  
The top heating element come on.  
The high and direct temperature of the grill is recommended for food which  
requires a high surface temperature. Always cook in this mode with the oven  
door closed.  
Oven light  
It goes on when selecting  
with the SELECTOR knob. It stays on when  
a cooking mode is selected.  
GRATIN mode  
The top heating element are activated and the fan begins to operate. This  
combination of features increases the effectiveness of the unidirectional  
thermal radiation provided by the heating elements through forced circulation  
of the air throughout the oven. This helps prevent food from burning on the  
surface and allows the heat to penetrate right into the food. Always cook in  
this mode with the oven door closed.  
BAKING mode  
The rear heating element and the fan are switched on, thus guaranteeing the  
distribution of heat in a delicate and uniform manner throughout the entire  
oven. This mode is ideal for baking temperature sensitive foods (such as  
cakes, which need to rise) and for the preparation of “bitesize pastries” on 3  
shelves simultaneously.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
6
 
Practical cooking advice  
GB  
!Do not place racks in position 1 and 5 during fan-assisted cooking. Excessive  
direct heat can burn temperature sensitive foods.  
! In the GRILLand GRATIN cooking modes, place the dripping pan in position  
1 to collect cooking residues (fat and/or grease).  
MULTILEVEL  
Use position 2 and 4, placing the food that requires more heat on 2.  
Place the dripping pan on the bottom and the rack on top.  
GRILL  
Insert the rack in position 3 or 4. Place the food in the centre of the rack.  
We recommend that you set the maximum power level. The top heating  
element is regulated by a thermostat and may not always be on.  
PIZZA  
Use a light aluminium pizza pan. Place it on the rack provided.  
For a crispy crust, do not use the dripping pan (prevents crust from forming  
by extending cooking time).  
If the pizza has a lot of toppings, we recommend adding the mozzarella  
cheese on top of the pizza halfway through the cooking process.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
7
 
Cooking advice table  
GB  
Cooking  
duration  
(minutes)  
Weight  
(in kg)  
Rack  
position  
Preheating time Recommended  
Modes  
Foods  
(minutes)  
temperature  
Duck  
Roast veal or beef  
Roast pork  
Biscuits (shortcrust pastry)  
Tarts  
1
1
1
-
3
3
3
3
3
15  
15  
15  
15  
15  
200  
200  
200  
180  
180  
65-75  
70-75  
70-80  
15-20  
30-35  
Traditional  
1
Pizza (on 2 racks)  
Lasagne  
Lamb  
Roast chicken + potatoes  
Mackerel  
Sponge cake made with yoghurt  
Cream puffs (on 2 racks)  
Biscuits (on 2 racks)  
Sponge cake (on 1 rack)  
Sponge cake (on 2 racks)  
Savoury pies  
1
1
1
1+1  
1
1
0.5  
0.5  
0.5  
1
2 and 4  
15  
10  
10  
15  
10  
10  
10  
10  
10  
10  
15  
230  
180  
180  
200  
180  
170  
190  
180  
170  
170  
200  
15-20  
30-35  
40-45  
60-70  
30-35  
40-50  
20-25  
10-15  
15-20  
20-25  
25-30  
3
2
2 and 4  
2
2
Multilevel  
2 and 4  
2 and 4  
2
2 and 4  
3
1.5  
Pizza  
Roast veal or beef  
Chicken  
0.5  
1
1
3
2
15  
10  
10  
220  
220  
180  
15-20  
25-30  
60-70  
Pizza  
Grill  
2 or 3  
Sole and cuttlefish  
Squid and prawn kebabs  
Cod fillet  
Grilled vegetables  
Veal steak  
Cutlets  
Hamburgers  
Mackerel  
1
1
1
1
1
1
1
4
4
4
5
5
5
5
5
5
5
5
5
MAX  
MAX  
MAX  
MAX  
MAX  
MAX  
MAX  
MAX  
MAX  
8-10  
6-8  
10  
10-15  
15-20  
15-20  
7-10  
15-20  
2-3  
3 or 4  
4
4
4
4
4
1
Toast  
no. 4  
Grilled chicken  
Cuttlefish  
1.5  
1.5  
2
2
5
5
200  
200  
55-60  
30-35  
Gratin  
Tarts  
Fruit cakes  
Sponge cake made with yoghurt  
Sponge cake  
Stuffed pancakes (on 2 racks)  
Small cakes (on 2 racks)  
Cheese puffs (on 2 racks)  
Cream puffs (on 3 racks)  
Biscuits (on 3 racks)  
Meringues (on 3 racks)  
0.5  
1
3
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
180  
180  
180  
160  
200  
190  
210  
180  
180  
90  
20-30  
40-45  
40-50  
25-30  
30-35  
20-25  
15-20  
20-25  
20-25  
180  
2 or 3  
3
3
2 and 4  
2 and 4  
2 and 4  
1, 3 and 5  
1, 3 and 5  
1, 3 and 5  
0.7  
0.5  
1.2  
0.6  
0.4  
0.7  
0.7  
0.5  
Baking  
! The cooking times listed above are intended as guidelines only and may be modified according to personal tastes.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
8
 
Setting the end time for a cooking mode  
!Acooking duration must be set before the cooking end time can be scheduled.  
The electronic programmer*  
GB  
1. Follow steps 1 to 3 to set the duration as detailed above.  
DISPLAY  
2. Next, press the  
button until the  
icon and the four digits on the  
DISPLAY begin to flash.  
END OF  
CLOCK icon  
TIMER icon  
3. use the “+” and “-” buttons to adjust the cooking end time; if you press  
and hold either button, the display will scroll through the values more quickly,  
making it quicker and easier to set the desired value.  
COOKING icon  
DURATION  
•• ••  
icon  
4. Wait for 10 seconds or press the  
5. When the set time has elapsed, the text END appears on the DISPLAY,  
the oven will stop cooking and a buzzer sounds.Press any button to stop it.  
Programming has been set when the  
DISPLAY shows the cooking end time and the cooking duration alternately.  
button again to finalise the setting.  
DECREASE TIME  
INCREASE TIME  
button  
button  
SET TIME  
button  
and  
buttons are illuminated. The  
For example: It is 9:00 a.m. and a duration of 1 hour has been programmed.  
12:30 is scheduled as the end time. The programme will start automatically  
at 11:30 a.m.  
Setting the clock  
! The clock may be set when the oven is switched off or when it is switched  
on, provided that a the end time of a cooking cycle has not been programmed  
previously.  
Cancelling a programme  
To cancel a programme:  
After the appliance has been connected to the mains, or after a blackout, the  
press the  
button until the icon corresponding to the setting you wish  
icon and the four numerical digits on the DISPLAY will begin to flash.  
to cancel and the digits on the display are no longer flashing. Press the  
“-” button until the digits 00:00 appear on the display.  
Press and hold the “+” and “-” buttons; this will cancel all the settings  
selected previously, including timer settings.  
1. Press the  
button several times until the  
icon and the four digits on  
the display begin to flash.  
2. Use the “+” and “-” buttons to adjust the time; if you press and hold either  
button, the display will scroll through the values more quickly, making it quicker  
and easier to set the desired value.  
3. Wait for 10 seconds or press the  
button again to finalise the setting.  
Setting the timer  
! This function does not interrupt cooking and does not affect the oven; it is  
simply used to activate the buzzer when the set amount of time has elapsed.  
1. Press the  
button several times until the  
icon and the three digits  
on the display begin to flash.  
2. Use the “+” and “-” buttons to set the desired time; if you press and hold  
either button, the display will scroll through the values more quickly, making  
it quicker and easier to set the value.  
3. Wait for 10 seconds or press the  
button again to finalise the setting.  
The display will then show the time as it counts down. When this period of  
time has elapsed the buzzer will be activated.  
Programming cooking  
! A cooking mode must be selected before programming can take place.  
Programming the cooking duration  
1. Press the  
button several times until the  
icon and the three digits  
on the DISPLAY begin to flash.  
2. Use the “+” and “-” buttons to set the desired duration; if you press and hold  
either button, the display will scroll through the values more quickly, making  
it quicker and easier to set the value.  
3. Wait for 10 seconds or press the  
button again to finalise the setting.  
4. When the set time has elapsed, the text END appears on the DISPLAY,  
the oven will stop cooking and a buzzer sounds. Press any button to stop it.  
For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is  
programmed. The programme will stop automatically at 10:15 a.m.  
* Only available in certain models.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
9
 
Consumers should contact their local authority or retailer for information  
concerning the correct disposal of their old appliance.  
Precautions and tips  
GB  
! This appliance has been designed and manufactured in compliance with  
international safety standards. The following warnings are provided for safety  
reasons and must be read carefully.  
Respecting and conserving the environment  
Whenever possible, avoid pre-heating the oven and always try to fill it.  
Open the oven door as little as possible because heat is lost every time  
it is opened. To save a substantial amount of energy, simply switch off  
the oven 5 to 10 minutes before the end of your planned cooking time  
and use the heat the oven continues to generate.  
General safety  
The appliance was designed for domestic use inside the home and is  
not intended for commercial or industrial use.  
The appliance must not be installed outdoors, even in covered areas. It is  
extremely dangerous to leave the appliance exposed to rain and storms.  
When moving or positioning the appliance, always use the handles  
provided on the sides of the oven.  
Automatic programmes are based on standard food product.  
Keep gaskets clean and tidy to prevent any door energy losses  
If you have a timed tariff electricity contract, the “delay cooking” option  
will make it easier to save money by moving operation to cheaper time  
periods.  
Do not touch the appliance while barefoot or with wet or damp hands and  
feet.  
The appliance must be used by adults only for the preparation of  
food, in accordance with the instructions provided in this booklet.  
Any other use of the appliance (e.g. for heating the room) constitutes  
improper use and is dangerous. The manufacturer may not be held  
responsible for any damage caused as a result of improper, incorrect  
and unreasonable use of the appliance.  
Do not touch the heating elements or certain parts of the oven door  
when the appliance is in use; these parts become extremely hot.  
Keep children well away from the appliance.  
Make sure that the power supply cables of other electrical appliances do  
not come into contact with the hot parts of the oven.  
The ventilation and heat dispersal openings must never be obstructed.  
Always grip the oven door handle in the centre: the ends may be hot.  
Always use oven gloves when placing cookware in the oven or when  
removing it.  
Do not use aluminium foil to line the bottom of the oven.  
Do not place flammable materials in the oven: if the appliance is switched  
on accidentally, the materials could catch fire.  
When unplugging the appliance, always pull the plug from the mains  
socket; do not pull on the cable.  
Do not perform any cleaning or maintenance work without having  
disconnected the appliance from the electricity mains.  
If the event of malfunctions, under no circumstances should you attempt  
to perform the repairs yourself. Contact an authorised Service Centre (see  
Assistance).  
Do not rest objects on the open oven door.  
Do not let children play with the appliance.  
The appliance should not be operated by people (including children)  
with reduced physical, sensory or mental capacities, by inexperienced  
individuals or by anyone who is not familiar with the product. These  
individuals should, at the very least, be supervised by someone who  
assumes responsibility for their safety or receive preliminary instructions  
relating to the operation of the appliance.  
The appliance is not intended to be operated by means of an external  
timer or separate remote-control system.  
Disposal  
When disposing of packaging material: observe local legislation so that  
the packaging may be reused.  
The European Directive 2012/19/EU on Waste Electrical and  
Electronic Equipment (WEEE), requires that old household electrical  
appliances must not be disposed of in the normal unsorted municipal  
waste stream. Old appliances must be collected separately in order  
to optimise the recovery and recycling of the materials they contain  
and reduce the impact on human health and the environment.  
The crossed out “wheeled bin” symbol on the product reminds you of your  
obligation, that when you dispose of the appliance it must be separately  
collected.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
10  
 
Maintenance and care  
GB  
Switching the appliance off  
Disconnect your appliance from the electricity supply before carrying out  
any work on it.  
! ATTENTION  
WHEN USING THE MAIN OVEN  
YOU MUST ENSURE THAT THE  
BASE OF THE CAVITY IS NOT  
COVERED WITH ALUMINUM  
FOIL, UTENSIL OR ANY OTHER  
FORM OF COVERING. FAILURE  
TO DO THIS MAY RESULT IN  
THE CAVITY BEING DAMAGED.  
Cleaning the appliance  
Slight differences in colour on the front of the oven are due to the different  
materials used, i.e. glass, plastic or metal.  
Any shady areas resembling grooves on the oven door glass are caused  
by reflections from the oven light.  
The enamel is branded at very high temperatures. This process may cause  
colour variations. This is normal and will not affect appliance operation in  
any way. The thin edges of the sheet metal cannot be entirely enamelled  
and may therefore appear to be unfinished. This will not affect the rust  
protection.  
The stainless steel or enamel-coated external parts and the rubber seals  
may be cleaned using a sponge that has been soaked in lukewarm water  
and neutral soap. Use specialised products for the removal of stubborn  
stains. After cleaning, rinse and dry thoroughly. Do not use abrasive  
powders or corrosive substances.  
The inside of the oven should ideally be cleaned after each use, while it is  
still lukewarm. Use hot water and detergent, then rinse well and dry with  
a soft cloth. Do not use abrasive products.  
Inspecting the seals  
Check the door seals around the oven regularly. If the seals are damaged,  
please contact your nearest Service Centre (seeAssistance). We recommend  
that the oven is not used until the seals have been replaced.  
Replacing the light bulb  
All accessories can be washed like everyday crockery, and are even  
dishwasher safe.  
We recommend that detergents are not sprayed directly onto the control  
panel, but that a sponge is used instead.  
To replace the oven light bulb:  
1. Remove the glass cover of the  
lamp-holder.  
2. Remove the light bulb and  
replace it with a similar one: Wattage  
25 W, cap E 14.  
! Never use steam cleaners or pressure cleaners on the appliance.  
3. Replace the glass cover (see  
diagram).  
Cleaning the oven door  
Clean the glass part of the oven door using a sponge and a non-abrasive  
cleaning product, then dry thoroughly with a soft cloth. Do not use rough  
abrasive material or sharp metal scrapers as these could scratch the surface  
and cause the glass to crack.  
! Do not use the oven lamp as/for ambient lighting.  
For more thorough cleaning purposes, the  
oven door may be removed:  
Side and rear catalytic liners*  
1. Open the oven door fully (see diagram).  
These are panels coated with a special enamel, which is able to absorb the  
fat released by food as it cooks.  
2. Use a screwdriver to lift up and turn the  
small levers F located on the two hinges  
(see diagram).  
This enamel is quite strong, so that the various accessories (racks, dripping  
pans, etc.) can slide along them without damaging them. White marks may  
appear on the surfaces; these are not a cause for concern.  
Nevertheless, the following should be avoided:  
- scraping the enamel with sharp objects (a knife, for example);  
- using detergents or abrasive materials.  
F
F
3. Grip the door on the two external sides and  
close it approximately half way. Unlock the  
door by pressing on the clamps F, then pull  
the door towards you lifting it out of its seat  
(see diagram).  
F
To replace the door, reverse this sequence.  
* Only available on certain models.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
11  
 
Afetr Sales Service  
GB  
No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the  
manufacturer.  
Essential Contact Information  
Hotpoint Service  
We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000  
fully qualified engineers on call to ensure you receive fast, reliable, local service.  
UK: 08448 224 224  
Republic of Ireland: 0818 313 413  
Please note: Our advisors will require the following information:  
Model number:  
Serial number:  
Parts and Accessories  
We supply a full range of genuine replacement parts as well as accessory products that protect and hygienically  
clean your appliance to keep it looking good and functioning efficiently throughout its life.  
UK: 08448 225 225  
Republic of Ireland: 0818 313 413  
Appliance Registration  
We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you  
must register your appliance with us.  
UK: 08448 24 24 24  
Republic of Ireland: 01 230 0800  
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB  
Indesit Company Unit 49 Airways Industrial Estate, Dublin 17  
Recycling and Disposal Information  
As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use  
quality, recycled components to keep down customer costs and minimise material wastage.  
Please dispose of packaging and old appliances carefully. To minimise the risk of injury to children, remove the  
door, plug, and cut the mains cable off flush with the appliance. Dispose of these parts separately to ensure that  
the appliance can no longer be plugged into mains socket, and the door cannot be locked shut.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
12  
 
Guarantee  
GB  
12 months Parts and Labour Guarantee  
Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for  
twelve months from the date of purchase.  
This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either  
workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.  
This guarantee is subject to the following conditions:  
-
The appliance has been installed and operated correctly and in accordance with our operating and  
maintenance instructions.  
-
-
-
The appliance is used only on the electricity or gas supply printed on the rating plate.  
The appliance has been used for normal domestic purposes only.  
The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by  
any person not authorised by us.  
-
-
-
Any repair work must be undertaken by us or our appointed agent.  
Any parts removed during repair work or any appliance that is replaced become our property.  
The appliance is used in the United Kingdom or Republic of Ireland.  
The guarantee does not cover:  
-
-
-
Damage resulting from transportation, improper use, neglect or interference or as a result of improper  
installation  
Replacement of any consumable item or accessory. These included but not limited to: plugs, cables,  
batteries, light bulbs, fluorescent tubes and starters, covers and filters.  
Replacement of any removable parts made of glass or plastic.  
THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR NON-  
DOMESTIC PREMISES.  
5 Year Parts Guarantee  
Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering  
your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for  
our engineer’s time. To activate the extra parts warranty on your appliance, simply call our registration line on  
08448 24 24 24 (Republic of Ireland 01 230 0800)  
Extended Guarantees  
We offer a selection of protection plans that enable you to fully cover yourself against the expense of repair bills  
for the life of your policy. To find the ideal plan for you please call our advice line on 08448 226 226 (Republic of  
Ireland 01 230 0233).  
Free Helpdesk Service  
We have a dedicated team who can provide free advice and assistance with your appliance if you experience  
any technical difficulties within the first 90 days of ownership. Simply call our Hotpoint Service Hotline on 08448  
224 224 (Republic of Ireland 0818 313 413) for telephone assistance, or, where necessary, to arrange for an  
engineer to call.  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
13  
 
GB  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
14  
 
GB  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
15  
 
195121388.00  
03/2014 - XEROX FABRIANO  
GB  
Indesit Company S.P.A.  
Viale Aristide Merloni,47  
60044 Fabriano (AN)  
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24  
16  
 

Graco Heat Pump 24J391 User Manual
Grundig DVD Player UMS 5101 CDC User Manual
H2O Audio Carrying Case WA1 5A1 User Manual
Haier Washer Dryer HWM65 0566 User Manual
Hans Grohe Indoor Furnishings 31100XX1 User Manual
Harbor Freight Tools Impact Driver 02623 User Manual
Hasbro Robotics 87524 User Manual
Honeywell Network Hardware NETAXS 123 User Manual
HP Hewlett Packard Network Card WLAN Assessment Service User Manual
HP Hewlett Packard PDAs Smartphones iPAQ hx4700 User Manual